WEBVTT

1
00:00:07.600 --> 00:00:11.136
When the wave belongs to a single store with no branches,

2
00:00:11.136 --> 00:00:16.782
assembly lists the orders one under the other, each with its customer, status and progress.

3
00:00:16.782 --> 00:00:20.690
At the top is the field to scan with the reader or type a code,

4
00:00:20.690 --> 00:00:24.971
although the reader is always listened to, without touching anything.

5
00:00:25.471 --> 00:00:27.780
Scanning a product opens its split:

6
00:00:27.780 --> 00:00:33.848
six units of shampoo were picked and go to three different orders, three units, two and one.

7
00:00:33.848 --> 00:00:38.860
If another product is scanned while the split is open, nothing opens on top:

8
00:00:38.860 --> 00:00:42.686
a notice asks to confirm or close the current split first.

9
00:00:43.186 --> 00:00:46.594
If there are fewer units on the table than were picked,

10
00:00:46.594 --> 00:00:49.692
lower the quantity of the order that goes without.

11
00:00:49.692 --> 00:00:52.729
The difference is flagged as missing at assembly:

12
00:00:52.729 --> 00:00:55.889
it is recorded on the wave and does not move stock,

13
00:00:55.889 --> 00:00:59.669
because those units already left the location during picking.

14
00:01:00.169 --> 00:01:06.052
When you confirm, the shampoo is set aside in the three orders at once and the wave refreshes:

15
00:01:06.052 --> 00:01:08.680
the notice of what did not reach assembly,

16
00:01:08.680 --> 00:01:12.122
the order that went without that unit flagged as short,

17
00:01:12.122 --> 00:01:17.567
and on every line the colour tells whether it is set aside, complete or short of units.

18
00:01:18.067 --> 00:01:23.467
If the unit turns up later, open the split again from the line and raise the quantity to

19
00:01:23.467 --> 00:01:25.001
recover what was missing.

20
00:01:25.001 --> 00:01:29.665
Once all the lines of an order are set aside, confirm its assembly as usual.